פתח תפריט ניווט

קטגוריות ראשיות

מגבר מנורות לגיטרה Tone King ROYALIST COMBO 40WATT 1X12 COMBO BLACK EL34

158-ROYALIST

תוספות ושדרוגים

 
מלאי
מחיר: 10,972 ₪
משלוח בדואר : 50 ₪
זמן אספקה: 4 ימים , קיימת אפשרות לאיסוף עצמי
למה לקוחות קונים אצלנו:
  • זמן אספקה: עד 4 ימים 
  • אפשרות לעד 12 תשלומים (ועד 6 תשלומים ללא ריבית) 
  • קניה מאובטחת ושירות לקוחות מעולה 
קניה בטוחה

מידע נוסף

ABOUT THE COMBO.

The original Royalist was the first Tone King amp to offer the best elements of British tone and was one of the company’s most beloved amps. The new Royalist MKIII is a 40-watt,

two-channel, all-tube, 1x12” combo that expands on that legacy by faithfully reproducing early British tones ranging from the sweet, singing JTM45, to the iconic “Plexi” sound,

all the way to the raging “Super Lead”. The Royalist MKIII authentically captures the vintage nature of these iconic amplifiers, delivering tones that span from clean to edge-of-breakup,

to the bright-crunchy leads found on countless classic rock tracks that helped shape music history. The built-in Iron Man II attenuator on each of the channels features a tuned reactive

load and special compensation circuitry that allows the power tubes to be fully driven, yet only allowing a fraction of the volume through the speaker.

INDEPENDENT VOLUME CONTROLS WITH FAT OPTION.

The Volume for both Channel A and Channel B features a PULL FAT option which changes the feel of the amplifier by delivering more low-end frequencies on the first gain

stage of the preamp. The FAT setting is ideal for a clean sound with a bit of bottom end or to add some juice if you are running overdriven.

 
Two channels with independent Volume and PULL FAT control dials
 

INDEPENDENT 3-WAY VOICING SWITCH PER CHANNEL.

The 1964, 1967 and 1970 three-position voicing switch on each channel allows you to choose the particular preamp, tone stack and negative feedback (power amp)

from three of the most iconic vintage British amps.

1964 – delivers a balanced treble response, lower gain, and less aggressive attack inspired by a vintage JTM45 or Bluesbreaker.
1967 – delivers the crisp treble response and aggressive attack of a vintage “Plexi”.
1970 – this highest gain setting delivers the raging “Super Lead” sound.

 

Three-way 1964, 1967 and 1970 voicing switches
 

TONE KING’S LEGENDARY IRON MAN II ATTENUATOR, ONE FOR EACH CHANNEL, WITH HF SWITCH.

The built-in Iron Man II attenuator on each of the channels features a tuned reactive load and special compensation circuitry that allows the power tubes to be fully driven,

yet only allowing a fraction of the signal through to the speaker.

 
Attenuation controls
 

TECHNICAL DETAILS

Key Features:

40W All-Tube 1×12” Combo

Two Channels with Volume Control and PULL FAT feature

Three-Position 1964, 1967 and 1970 Voicing Switch, Per Channel

6-Step Iron Man II Attenuator, Per Channel

Wide Variety of Vintage British Tone

Tubes:

V1 = 12AX7 1st Stage Preamp Circuit (Channel A & B)

V2 = 12AX7 2nd Stage Preamp Circuit / Tone Stack

 

V3 = 12AX7 Phase Inverter

V4 & V5 = EL34 Power Amplifier

V6 = 5AR4 High Voltage Rectifier

 

Speaker:

Custom Celestion “1660” 12” Speaker

Preamp:

2 Identical Channels, Foot-Switchable

 

Shared Controls: Volume, Treble, Bass and Presence

Volume Control with PULL FAT feature Per Channel

Three-position 1964, 1967 and 1970 Voicing Switch Per Channel

 

Iron Man II Attenuator:

Precision tuned frequency compensated reactive load

Dual attenuation controls (one for each channel)

Attenuation steps: 0db, -3db, -9db, -15db, -24db, -36db

 

Footswitch:

Single Button Channel Footswitch with LED Indicator

25’ Instrument Cable Included

 

Line Out:

1/4″ Unbalanced Line Out Jack with Level Control

Speaker Impedance Select:

4, 8 or 16 Ohms

 

Cabinet:

Tongue and Groove Baltic Birch Construction

Dimensions: 12” (L) x 24.5″ (W) x 21” (H)

Weight: 59 LBS

 

 

 

 

 

no-lazy